090 MOORE’S WOOD
WOOD PAINT
Penetrating Wood Preservative Water Based
090 MOORE’S WOOD is a ready-to-use water based wood preservative for amateur, professional and industrial use against wood Rot and Blue Stain on internal and external wood components such as windows, exterior doors, cladding, fences, eaves and carports. Not for use on wood in direct soil contactor in marine environment.
Available Sizes: 1L
Spreading Rate : 8 – 10 m2/ l depending on wood porosity
Dry Time at 20°C : 30 minutes to touch, 2 hours to recoat
Thinning : Do not thin
For application by : Brush, roller, spray
Performance Features
- Protects wood against insects, fungi, mould, blue stains and every kind of micro-organisms
- Deep penetration and elasticity
- Allows wood to breath
- Easy application, dries quickly
- For interior/Exterior use
Colors: Clear
Toxicity: Formulated without lead or mercury
Gloss Level: Flat 0-5 at 60° viewing angle
Performance Guide
- Weather Resistance : Excellent weather resistance
- Water Resistance : Excellent rain and condensation resistance
VOC (Volative Organic Compounds) CONTEΝT. EU maximum VOC content limit values (Directive 2004/42/CE) for this product (category A/h “Binding primers” Type WB): 30 g/L. This product contains maximum 29 g/L VOCs (ready for use product).
Surface Preparation
-
Surfaces must be clean, dry and free of dirt, oil or grease.
-
Completely remove old or poorly adhering varnish and paint to expose new wood.
-
On tropical wood wash down with nitro thinner to remove resins that may lengthen dry times.
-
It mildew is evident it must be removed by scrubbing with a commercial mildew wash, following manufacturer’s direction and cautions.
Application
- Stir thoroughly before and during use.
- Apply without thinning by brush, cloth or by dipping.
- For greater protection finish by applying 2 coats of colored 093/094 Acrylic Varnish.
- Do not apply when temperature is below 10°C or against the hot sun.
- Drying times are longer in cool/moist.
