For Interior Use

A superior quality paint that produces a beautiful, uniform, flat finish on properly prepared plaster, concrete, bricks, masonry, gypsum board, and wood. It has no unpleasant odour and features easy application, a spatter-resistant formulation, fast dry, excellent covering qualities and soap and water cleanup. Deep colours in flat paints do not lend themselves to hard usage or washing because they have a tendency to scuff or burnish. For areas subject to excessive wear or rough handling, use 519 COLORSTYLE Eggshell Emulsion.

Available Sizes : 1L, 3L, 10L
Colors : White and over 3.500 tinted colors are available from the Moor-O-Matic Color System.

Spreading Rate : 10 – 11 m2/ l per coat
Dry Time at 20°C : 1 hour to touch, 2 to 4 hours to recoat
Thinning : Ready for use, if necessary thin up to 5% with water
For application by : Brush, roller, spray

Performance Features

  • Dries to a beautiful, decorative flat finish
  • Spatter-resistant, low odour
  • Easy application and clean up, quick recoat
  • Excellent opacity
  • Breathable film

Colors : White and over 3.500 tinted colors are available from the Moor-O-Matic Color System.
Gloss Level : 0-5 at 60 degree viewing angle
Toxicity : Formulated without lead or mercury

Performance Guide

  • Weather Resistance : Not recommended for exterior use.
  • Heat Resistance : 60°C.
  • Water Resistance : Washable. Allow 7 days after application for firm to cure.
  • Abrasion Resistance : Resists marring, less so in darker colors.
  • Solvent Resistance : Good resistance to white spirits. Sensitive to aromatic hydro carbons and alcohols.

Surface Preparation

  • Surface to be painted must be clean, dry and free of grease, dirt, dust, flaking paint and mildew.
  • Dull glossy areas by sanding.
  • Apply two coats of 515 COLORSTYLE Flat Emulsion after priming the surface as outlined below
  • New Plaster, Gypsum Board : Prime with a full coat of 192 Aqua Grip Eco Primer or 570 MOORESTYLE Alkyd Multi-primer.
  • Masonry, Concrete, Bricks : Prime with 182 SUPER SPEC Stabilising Primer or 181 SUPER SPEC. Alkali-Resisting Primer.
  • Previously Painted Surfaces : If surface is sound, prime with 023 FRESH START Eco Primer. Fill nail holes and cracks and sand when dry. Patched surfaces should be spot-primed with 023 FRESH START Eco Primer. If previous coating is old porous lime, apply an overall coat of 182 SUPER SPEC Stabilising Primer.
  • New Wood : Prime surfaces with 572 MOORESTYLE Alkyd Undercoat or 023 FRESH START Eco Primer.


  • Stir paint thoroughly before use.
  • Apply by brush, roller or spray.
  • Use a short nap roller on smooth surfaces.
  • Thin as 5% with clean water.
  • Do not apply at temperatures below 10OC.
  • Drying times are longer in cool/moist conditions.
  • Equipment Cleaning : Clean equipment in warm, soapy water.







Pin It on Pinterest

Share This