219 ECO STYLE SOFT MATTE
INTERIOR PAINT
Ecological Paint for Interior Use
Eco Style Soft Matte is a premium acrylic interior paint. It is odorless without ammonia, suitable for schools, nurseries, hospitals, offices. Due to its special formula it protects the user and the environment. Dries an elegant Soft Matte finish, that gives excellent scrub and cleaning properties based on microscopic ceramic beads technology. It features easy application and clean up, excellent opacity and a spatter- resistant formula.
Eco certified according to the new criteria of the European Union Eco-labeling Board (EUEB). For more information as to why this product has been awarded the Flower please visit the web-site: www.ecolabel.eu.
Available Sizes : 1L, 3L, 10L
Colors : White and over 3.500 tinted colors are available from the Moor-O-Matic Color System.
Spreading Rate : 9- 11 m2/ l
Dry Time at 20°C : 1 hour to touch, 2-4 hours to recoat
Thinning : 5% water if necessary
For application by : Brush, roller, spray
Performance Features
- Odorless without ammonia, suitable for schools, nurseries, hospitals, offices
- Based on microscopic ceramic beads technology, gives excellent scrub and cleaning properties
- Dries to an elegant Soft Matte Finish
- Features easy application and clean up, excellent opacity and a spatter resistant formula
- It protects the user and the environment
Gloss : Soft Matte
Performance Guide
- Water Resistance : Washable. Allow 7 days after application for firm to cure
- Heat Resistance : Up to 60°C
- Abrasion Resistance : Resists marring, less so in darker colors.
VOC (Volatile Organic Compounds): EU limit value for this product category A/a WB: Interior matte walls and ceilings (gloss <25@60°), 30g/l(2010). This product contains maximum 2g/l VOC
Surface Preparation
- Surface to be painted must be clean and free of dirt, grease, dirt, dust, flaking paint and mildew
- Dull glossy areas by sanding.
- Apply one or two coats of N219 Life Style Soft Matte after priming the surface as outlined below
- Make sure to use primer before applying 219 color on the following surfaces
- New Plaster, Gypsum Board : Prime with a full coat of 192 Aqua Grip Micronized Primer or 023 FRESH START Eco Primer
- Masonry, Concrete, Bricks : 023 FRESH START Eco Primer or Prime with 181 SUPER SPEC Alkali-resisting Primer
- Previously Painted Surfaces : If surface is sound, prime with 023 FRESH START Eco Primer. Fill nail holes and cracks and sand when dry. Patched surfaces should be spot-primed with 023 FRESH START Eco Primer. If previous coating is old porous lime, apply and overall coat of 192 Aqua Grip Micronizes Primer.
Application
- Stir paint thoroughly before use.
- Apply by brush, roller, or spray.
- Use short nap roller on smooth surfaces.
- Thin 5% with clean water.
- Do not apply at temperatures below 10°C.
- Close container when not in use.
- Dries in 1 hour. Recoat in 2 to 4 hours. Drying times are longer in cool/moist conditions
- Equipment Cleaning : Clean brushes and equipment with water and detergent solution immediately after use.
